Dell POWEREDGE M1000E - Manual (Page 196)

176 Fabric OS MIB Reference
53-1002750-01
Switch connectivity unit port statistics extension table
6
swConnUnitStopTenancySt
arVation
1.3.6.1.4.1.1588.2.1.1.1.
27.1.5 Read only This counter is incremented when the FL_port cannot transmit a frame
because of lack of credit.
swConnUnitOpend
1.3.6.1.4.1.1588.2.1.1.1.
27.1.6 Read only The number of times FC port entered OPENED state.
swConnUnitTransferConne
ction
1.3.6.1.4.1.1588.2.1.1.1.
27.1.7 Read only The number of times FC port entered TRANSFER state.
swConnUnitOpen
1.3.6.1.4.1.1588.2.1.1.1.
27.1.8 Read only The number of times FC port entered OPEN state.
swConnUnitInvalidARB
1.3.6.1.4.1.1588.2.1.1.1.
27.1.9 Read only The number of times FC port received invalid ARB.
swConnUnitFTB1Miss
1.3.6.1.4.1.1588.2.1.1.1.
27.1.10 Read only This counter is incremented when the port receives a frame with a DID
that cannot be routed by FCR. Applicable to 8G platforms only.
swConnUnitFTB2Miss
1.3.6.1.4.1.1588.2.1.1.1.
27.1.11 Read only This counter is incremented when the port receives a frame with an
SID/DID combination that cannot be routed by the VF module.
Applicable to 8G platforms only.
swConnUnitFTB6Miss
1.3.6.1.4.1.1588.2.1.1.1.
27.1.12 Read only This counter is incremented when port receives a frame with an SID
that cannot be routed by FCR. Applicable to 8G platforms only.
swConnUnitZoneMiss
1.3.6.1.4.1.1588.2.1.1.1.
27.1.13 Read only This counter is incremented when the port receives a frame with an
SID and DID that are not zoned together.
swConnUnitLunZoneMiss
1.3.6.1.4.1.1588.2.1.1.1.
27.1.14 Read only This counter is incremented when the port receives a frame with an
SID, DID, and LUN that are not zoned together.
This is not currently used.
swConnUnitBadEOF
1.3.6.1.4.1.1588.2.1.1.1.
27.1.15 Read only The number of frames with bad EOF.
swConnUnitLCRX
1.3.6.1.4.1.1588.2.1.1.1.
27.1.16 Read only The number of link control frames received.
swConnUnitRDYPriority
1.3.6.1.4.1.1588.2.1.1.1.
27.1.17 Read only The number of times that sending R_RDY or VC_RDY primitive signals
was a higher priority than sending frames, due to diminishing credit
reserves in the transmitter at the other end of the fibre.
swConnUnitLli
1.3.6.1.4.1.1588.2.1.1.1.
27.1.18 Read only The number of low level interrupts generated by the physical and link
layer.
swConnUnitInterrupts
1.3.6.1.4.1.1588.2.1.1.1.
27.1.19 Read only The object represents all the interrupts received on a port. The
interrupt includes LLI, unknown, and so on.
TABLE 61
Object and OID Access Description