Dell POWEREDGE M1000E - Manual (Page 354)

334 Fabric OS MIB Reference
53-1002750-01
RSTP MIB
18
dot1dStpPortAdminEdge
Port
1.3.6.1.2.1.17.2.19.1.2 Read-write The administrative value of the edge port parameter.
•
true (1) - Indicates that this port should be assumed as an edge
port.
•
false (2) - Indicates that this port should be assumed as a non
edge port.
dot1dStpPortOperEdgeP
ort
1.3.6.1.2.1.17.2.19.1.3 Read only The operational value of the edge port parameter. The object is
initialized to the value of the corresponding instance of
dot1dStpPortAdminEdgePort. When the corresponding instance of
dot1dStpPortAdminEdgePort is set, this object will be changed as
well. This object will also be changed to false on reception of a BPDU.
dot1dStpPortAdminPoint
ToPoint
1.3.6.1.2.1.17.2.19.1.4 Read-write The administrative point-to-point status of the LAN segment attached
to this port, using the enumeration values of the IEEE 802.1w clause.
Valid values:
•
forceTrue (0) - Indicates that this port should always be treated
as if it is connected to a point-to-point link.
•
forceFalse (1) - Indicates that this port should be treated as
having a shared media connection.
•
auto (2) - Indicates that this port is considered to have a
point-to-point link, if it is an aggregator and all of its members
are aggregatable, or if the MAC entity is configured for full
duplex operation, either through auto-negotiation or by
management means.
Manipulating this object changes the underlying
adminPortToPortMAC. The value of this object must be retained
across re-initializations of the management system.
dot1dStpPortOperPointT
oPoint
1.3.6.1.2.1.17.2.19.1.5 Read only The operational point-to-point status of the LAN segment attached to
this port.
dot1dStpPortAdminPath
Cost
1.3.6.1.2.1.17.2.19.1.6 Read-write The administratively assigned value for the contribution of this port to
the path cost of paths toward the spanning tree root.
TABLE 130
object and OID Access Description