Dell POWEREDGE M1000E - Manual (Page 320)

300 Fabric OS MIB Reference
53-1002750-01
LLDP-EXT-DOT3-MIB
16
lldpXdot3LocPortAutoNe
gAdvertisedCap
1.0.8802.1.1.2.1.5.462
3.1.2.1.1.3 Read only This object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which
is associated with the given port on the local system.
lldpXdot3LocPortOperMa
uType
1.0.8802.1.1.2.1.5.462
3.1.2.1.1.4 Read only An integer value that indicates the operational MAU type of the given port
on the local system.
lldpXdot3LocPowerTable
1.0.8802.1.1.2.1.5.462
3.1.2.2 Not
accessible This table contains power Ethernet information of the local system known
to the agent.
NOTE: This table is not supported.
lldpXdot3LocLinkAggTabl
e
1.0.8802.1.1.2.1.5.462
3.1.2.3 Not
accessible This table contains one row per port of link aggregation information (as a
part of the LLDP 802.3 organizational extension) on the local system
known to this agent.
lldpXdot3LocLinkAggEntr
y
1.0.8802.1.1.2.1.5.462
3.1.2.3.1 Not
accessible The link aggregation information about a particular port component.
lldpXdot3LocLinkAggStat
us
1.0.8802.1.1.2.1.5.462
3.1.2.3.1.1 Read only The bitmap value contains the link aggregation capabilities and the
current aggregation status of the link.
lldpXdot3LocLinkAggPort
Id
1.0.8802.1.1.2.1.5.462
3.1.2.3.1.2 Read only This object contains the IEEE 802.3 aggregated port identifier, aAggPortID
(IEEE 802.3-2002, 30.7.2.1.1), derived from the ifNumber of the ifIndex
for the port component in link aggregation.
If the port is not in link aggregation state and if it does not support link
aggregation, this value should be set to zero.
lldpXdot3LocMaxFrameS
izeTable
1.0.8802.1.1.2.1.5.462
3.1.2.4 Not
accessible This table contains one row per port of maximum frame size information
(as a part of the LLDP 802.3 organizational extension) on the local system
known to this agent.
lldpXdot3LocMaxFrameS
izeEntry
1.0.8802.1.1.2.1.5.462
3.1.2.4.1 Not
accessible The maximum frame size information about a particular port component.
lldpXdot3LocMaxFrameS
ize
1.0.8802.1.1.2.1.5.462
3.1.2.4.1.1 Read only An integer value indicating the maximum supported frame size in octets
on the given port of the local system.
TABLE 114
object and OID Access Description