Dell POWEREDGE M1000E - Manual (Page 104)

84 Fabric OS MIB Reference
53-1002750-01
fcFeAccounting group
4
fcFeAccounting group
The Accounting group is supported only in Fabric OS v4.x.
The Accounting group consists of the following tables:
• Class 1 accounting table
• Class 2 accounting table
• Class 3 accounting table
Each table contains accounting information for the Fx_Ports in the fabric element.
fcFxPortSigLosses
1.3.6.1.2.1.75.1.3.1.1.3 Read only The number of loss of signal errors detected by the Fx_Port.
fcFxPortPrimSeqProtoErr
ors
1.3.6.1.2.1.75.1.3.1.1.4 Read only The number of primitive sequence protocol errors detected by the
Fx_Port.
fcFxPortInvalidTxWords
1.3.6.1.2.1.75.1.3.1.1.5 Read only The number of invalid transmission word errors detected by the Fx_Port.
fcFxPortInvalidCrcs
1.3.6.1.2.1.75.1.3.1.1.6 Read only The number of invalid cyclic redundancy checks (CRC) detected by this
Fx_Port.
fcFxPortDelimiterErrors
1.3.6.1.2.1.75.1.3.1.1.7 Read only The number of delimiter errors detected by this Fx_Port.
fcFxPortAddressIdErrors
1.3.6.1.2.1.75.1.3.1.1.8 Read only The number of address identifier errors detected by this Fx_Port.
fcFxPortLinkResetIns
1.3.6.1.2.1.75.1.3.1.1.9 Read only The number of Link Reset Protocol errors received by this Fx_Port from
the attached Nx_Port.
fcFxPortLinkResetOuts
1.3.6.1.2.1.75.1.3.1.1.10 Read only The number of Link Reset Protocol errors issued by this Fx_Port to the
attached Nx_Port.
fcFxPortOlsIns
1.3.6.1.2.1.75.1.3.1.1.11 Read only The number of Offline Sequence errors received by this Fx_Port.
fcFxPortOlsOuts
1.3.6.1.2.1.75.1.3.1.1.12 Read only The number of Offline Sequence issued by this Fx_Port.
TABLE 29
Object and OID Access Description
TABLE 30
Object and OID Access Description
fcFxPortC1AccountingTable
1.3.6.1.2.1.75.1.4.1 Not
accessible A table that contains Class 1 accounting information recorded since
the management agent re-initialized, one entry for each Fx_Port in the
fabric element.
fcFxPortC1AccountingEntry
1.3.6.1.2.1.75.1.4.1.1 Not
accessible An entry containing Class 1 accounting information for each Fx_Port.
fcFxPortC1InFrames
1.3.6.1.2.1.75.1.4.1.1.1 Read only The number of Class 1 frames (other than Class 1 connect-request)
received by this Fx_Port from its attached Nx_Port.