Dell POWEREDGE M1000E - Manual (Page 119)

Fabric OS MIB Reference 99
53-1002750-01
fcFeError group
4
fcFeError group
This group consists of tables that contain information about the various types of errors detected.
The management station might use the information in this group to determine the quality of the
link between the Fx_Port and its attached Nx_Port.
Implementation of this group is optional.
fcFxPortIntermixSuppAgre
ed
1.3.6.1.3.42.2.1.2.4.1.8 Read only A variable indicating that the attached Nx_Port has requested the
Fx_Port for Intermix support and the Fx_Port has granted the request.
This flag is only valid if Class 1 service is supported.
Valid values:
•
yes (1)
•
no (2)
fcFxPortStackedConnMod
eAgreed
1.3.6.1.3.42.2.1.2.4.1.9 Read only Indicates whether the Fx_Port has agreed to support stacked connect
from the fabric login. This is only meaningful if Class 1 service has been
agreed to.
fcFxPortClass2SeqDelivAg
reed
1.3.6.1.3.42.2.1.2.4.1.10 Read only A variable indicating whether the Fx_Port has agreed to support Class 2
sequential delivery from the fabric login. This is only meaningful if Class
2 service has been agreed.
Valid values:
•
yes (1)
•
no (2)
fcFxPortClass3SeqDelivAg
reed
1.3.6.1.3.42.2.1.2.4.1.11 Read only A flag indicating whether the Fx_Port has agreed to support Class 3
sequential delivery from the fabric login. This is only meaningful if Class
3 service has been agreed to.
Valid values:
•
yes (1)
•
no (2)
fcFxPortNxPortName
1.3.6.1.3.42.2.1.2.4.1.12 Read only The port name of the attached Nx_Port, if applicable. If the value of this
object is ‘0000000000000000’H, this Fx_Port has no Nx_Port
attached to it.
fcFxPortConnectedNxPort
1.3.6.1.3.42.2.1.2.4.1.13 Read only The address identifier of the destination Fx_Port with which this Fx_Port
is currently engaged in either a Class 1 or loop connection. If the value
of this object is ‘000000’H, this Fx_Port is not engaged in a connection.
fcFxPortBbCreditModel
1.3.6.1.3.42.2.1.2.4.1.14 Read only Identifies the BB_Credit model used by the Fx_Port. The regular model
refers to the buffer-to-buffer flow control mechanism defined in FC-PH
[1] used between the F_Port and the N_Port. For FL_Ports, the alternate
buffer-to-buffer flow control mechanism as defined in FC-AL [4] is used
between the FL_Port and any attached NL_Ports.
TABLE 34
Object and OID Access Description