Dell POWEREDGE M1000E - Manual (Page 229)

Fabric OS MIB Reference 209
53-1002750-01
Connectivity unit group
9
connUnitConfigurationCh
angeTime
1.3.6.1.3.94.1.6.1.16 Read only The sysuptime time stamp (in centiseconds) at which the last
configuration change occurred for any members of the set. In other
words, this is the latest time stamp of flash memory update. This
represents a union of change information for
connUnitConfigurationChangeTime
NOTE: This object is not supported.
connUnitNumRevs
1.3.6.1.3.94.1.6.1.17 Read only The number of revisions in connUnitRevsTable.
Set to 2.
connUnitNumZones
1.3.6.1.3.94.1.6.1.18 Read only Number of zones defined in connUnitZoneTable.
NOTE: This object is not supported.
connUnitModuleId
1.3.6.1.3.94.1.6.1.19 Read only This is a unique ID, persistent between boots, that can be used to group
a set of connUnits together into a module. The intended use would be to
create a connUnit with a connUnitType of “module” to represent a
physical or logical group of connectivity units. Then the value of the
group would be set to the value of connUnitId for this “container”
connUnit.
connUnitModuleId should be 0s if this connUnit is not part of a module.
Set to the WWN of the switch.
connUnitName
1.3.6.1.3.94.1.6.1.20 Read-write A display string containing a name for this connectivity unit. This object
value should be persistent between boots.
Set to switchName/sysName.
connUnitInfo
1.3.6.1.3.94.1.6.1.21 Read-write A display string containing information about this connectivity unit. This
object value should be persistent between boots.
For a Fabric switch set to sysDescr and read only.
For a Brocade Access Gateway device set to “Access Gateway.”
TABLE 75
Object and OID Access Description