CANOGA PERKINS 9140 Four-Port SNMP Managed Fast Ethernet Switch - Manual (Page 23)

EdgeAccess SNMP Managed Fast Ethernet Switch
Model 9135/9140 1-13
Step 5 At this point the HyperTerminal program will open the newly created 9135/9140 Switch Terminal
as shown in Figure 1-12. Note the screen succession will be, Login Menu (enter password), and
the Main Menu.
Figure 1-12. Opening Screens for the 9135/ 91 40 SW File.
Step 6 When configured correctly, HyperTerminal will open and prompt you to enter a "Password." If
this is your initial setup, no password has yet to be defined, so you will select <Enter>. If this is
not your initial setup, enter the proper password as established for Supervisor, Manager, or User,
and select <Enter>. The Main Menu will appear. See Figure 1-12.
At this point the terminal has been correctly configured and is operational. The following Section
details how to configure the 9135 for in-band management.
Note: The terminal operation has an automatic "logout" function after 10 minutes of idle time.
Deleted: ¶
¶
¶
¶
Deleted: Page of 871