CANOGA PERKINS 9140 Four-Port SNMP Managed Fast Ethernet Switch - Manual (Page 71)

EdgeAccess SNMP Managed Fast Ethernet Switch
Model 9135/9140 5-25
5.2.5 Diagnostics
The Diagnostics menu allows the user to perform Ping and Sniffer type diagnostics. See Figure 5-32.
Figure
5 - 32 . Diagnostics Menu.
5.2.5.1 Ping
Ping is a diagnostic routine in which the user can send out a signal, or Ping, to a known remote unit where
the remote unit will receive it and return a reply.
Enter the address of the unit to be Pinged, the number of Pings to transmit (0-999, with 0 being infinite)
and select "Start Pinging." From this routine the user will know that the link to the remote unit is valid and
the round trip time for a response. To stop Ping, press the ESC key. See Figure 5-33 for Ping screens.
Figure 5 - 33 . Ping Screens .
Diagnostics
• Ping
• Sniffer Settings
• Main Menu
Formatted: Bullets and Numbering
Formatted
Formatted
Deleted: ¶
¶
¶
Deleted:
Deleted: Page of 871