CANOGA PERKINS 9140 Four-Port SNMP Managed Fast Ethernet Switch - Manual (Page 34)

3-8
3.2.5 10BASE FL Single Mode Module
This module is a plug-in which contains the 10BASE-FL Single Mode interface Figure 3-8.
The interface components are the following:
• ST, FC/PC connector
• Single Mode Transceiver
• Port LEDs
• Tx Transmit (Green)
• Lnk Link (Green)
• Col Collision (Yellow)
• Rx Receive (Green)
• Fdx Half/Full-Duplex (Green)
• Par Partition/Disable (Red)
• Internal slide switch for selecting:
• HI/LO Optical Transmit Power High/Low (High recommended; use Low for bench testing)
• Connectors: Edge connector to the main board unit
Figure 3-8 . 10BASE-FL Single Mode Module.
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Formatted
Formatted