CANOGA PERKINS 9140 Four-Port SNMP Managed Fast Ethernet Switch - Manual (Page 91)

EdgeAccess SNMP Managed Fast Ethernet Switch
Model 9135/9140 B-7
Select "Server" tab. Under "Dial-Up Server Type," highlight "SLIP: Internet."
Figure B-9. Server Setup.
Check "TCP/IP" box and click on the "SLIP TCP/IP Settings" button and enter a valid address.
It is important at this point to make a note of the IP address for future reference. The Canoga
Perkins unit must be under the same subnet mask as the Host. Click OK.
Figure B-10. SLIP TCP/IP Settings.
Deleted: ¶
Deleted: ¶
¶
Deleted: Page of 871