CANOGA PERKINS 9140 Four-Port SNMP Managed Fast Ethernet Switch - Manual (Page 50)

5-4
5.2 Operation of the VT100 Program
If this is your initial setup and no password has been defined, the 9135/9140 will go directly to the Main
Menu. If this is not your initial setup, enter the proper password as established for Supervisor, Manager, or
User, and select <Enter>. The Main Menu screen will appear. See Figure 5-6.
Note: Caution must be taken when establishing the passwords. After gaining access to the menus, each
editable menu item has a minimum access level, which must be met before the edit is allowed. For example,
if you are logged in as USER and you try to change a Spanning Tree parameter, you will get a message
"ACCESS DENIED: SUPERVISOR LEVEL REQUIRED." Refer to Passwords Section.
Figure 5 -6. Opening Screens for the 9135 or 9140 SW File.
Deleted: ¶
¶
¶