Chapter 6 specifications, 1 interfaces, Specifications – CANOGA PERKINS 9140 Four-Port SNMP Managed Fast Ethernet Switch User Manual
Page 77: Chapter 6

EdgeAccess SNMP Managed Fast Ethernet Switch
Model 9135/9140
6-1
Chapter 6
Specifications
6.1 Interfaces
Number of Ports:
•
Two on Model 9135, plug-ins
•
Four on Model 9140, plug-ins
•
Each port can be copper (10/100Mbps) or fiber (10 or 100Mbps SM or MM)
UTP Copper:
•
10/100BASE-TX configurable or auto-negotiable
•
RJ-45 shielded connector
•
Full / Half-duplex configurable or auto-negotiable
•
Auto negotiation configurable on or off
•
Auto polarity switch configurable for Normal or X-over cable
•
Distance: 100 meters
AUI Copper:
•
10BASE-5
•
DA-15 Male/Female
•
Half-duplex
10Mbps Fiber Multimode:
•
10BASE-FL
•
ST connectors
•
Full / Half-duplex configurable
•
Optical budget: minimum 15dB for 62.5/125 micron multimode
•
Wavelength: 850nm
10Mbps Single Mode Fiber:
•
10BASE-FL
•
ST, FC/PC and connectors
•
Full / Half-duplex configurable
•
Optical budget:
minimum
1
0dB for 9/125 micron single mode
•
Wavelength: 1310nm
10Mbps Single Mode Fiber:
•
10BASE-FL
•
ST, FC/PC and connectors
•
Full / Half-duplex configurable
•
Optical budget: minimum 20dB for 9/125 micron single mode
•
Wavelength: 1310nm
10Mbps Single Mode, Long Distance Fiber:
•
10BASE-FL
•
ST, FC/PC and connectors
•
Full / Half-duplex configurable
•
Optical budget: minimum 25dB for 9/125 micron single mode
•
Wavelength: 1310nm
•
Distance: 70km or better
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Deleted: <#>¶
Deleted: ¶
Deleted:
Page of 871