6 10base-fl multimode module – CANOGA PERKINS 9140 Four-Port SNMP Managed Fast Ethernet Switch User Manual
Page 36
Advertising

3-10
3.2.6 10BASE-FL Multimode Module
This is a plug-in module which contains the 10BASE-FL Multimode interface Figure 3-9.
The interface components are the following:
•
ST connector
•
Multimode Transceiver
•
Port LEDs
•
Tx Transmit
(Green)
•
Lnk Link
(Green)
•
Col Collision
(Yellow)
•
Rx Receive
(Green)
•
Fdx Half/Full-Duplex
(Green)
•
Par Partition/Disable
(Red)
•
Connectors: Edge connector to the main board unit
Figure
3-9
. 10BASE-FL Multimode Module.
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering
Deleted: ¶
¶
Advertising
This manual is related to the following products: