CANOGA PERKINS 9140 Four-Port SNMP Managed Fast Ethernet Switch User Manual
Page 67
Advertising
EdgeAccess SNMP Managed Fast Ethernet Switch
Model 9135/9140
5-21
Figure
5
-2
5
. VLAN Configuration
S
creen.
To configure the VLAN parameters, select the port that you wish to change the virtual location. You will
then be prompted to press the <Tab> key to change the VLAN position of that port. Do this with each of
the ports as desired. After setting the port VLAN parameters, make sure that Enable VLAN is set to
"yes." See Figure 5-26.
Figure
5
-2
6.
VLAN Configuration for
A
ssigning VLAN
P
orts.
Deleted:
Deleted:
Page of 871
Advertising
This manual is related to the following products: