4 100base-fx multimode module – CANOGA PERKINS 9140 Four-Port SNMP Managed Fast Ethernet Switch User Manual

Page 33

Advertising
background image

EdgeAccess SNMP Managed Fast Ethernet Switch

Model 9135/9140

3-7

3.2.4 100BASE-FX Multimode Module

This module is a plug-in which contains the 100BASE-FX Multimode interface Figure 3-7.

The interface components are the following:

SC/ST connector

Port LEDs

Tx Transmit

(Green)

Lnk Link

(Green)

Col Collision

(Yellow)

Fdx Half/Full-Duplex

(Green)

Rx Receive

(Green)

Par Partition/Disable

(Red)

Rmtf

Remote Fault (Red), Managed units only

Llf

Link Loss Forwarding/Enabled (Green) (Disabled on 9140)

Connectors: Edge connector to the main board





Figure

3-7

. 100BASE FX Multimode Module.



Deleted:

Page of 871

Formatted: Bullets and Numbering

Formatted: Bullets and Numbering

Formatted: Bullets and Numbering

Advertising
This manual is related to the following products: