Comtech EF Data CDM-840 - Manual (Page 106)

CDM-840 Remote Router Revision 2
Ethernet-based Remote Product Management MN-CDM840
6–38
6.4.4.5.2.3 Configuration | WAN | QoS
The ADVANCED QUALITY OF SERVICE FAST feature, once activated, is available only
when the standard QoS feature is enabled.
The appearance of this page changes depending on the selected QoS Control Mode.
(TOP) QoS Control Mode = OFF
(BOTTOM) QoS Control Mode = Diffserv (Banner, VFP, Menu Bar not shown)
Figure 6-17. Configuration | WAN | QoS Page