Comtech EF Data CDM-840 - Manual (Page 84)

CDM-840 Remote Router Revision 2
Ethernet-based Remote Product Management MN-CDM840
6–16
6.4.4.4.2 Admin | VMS
VMS v3.x.x VIPERSAT Management System User Guide (CEFD P/N MN/22156)
Figure 6-8. Admin | VMS Page
Vipersat Management System Configuration
The acceptable/valid operating ranges for items in this section are provided in parentheses.
• Network ID (1-254) – The Network ID designation defines to which network the CDM-840
belongs. All devices in a common network will have the same network ID. The network ID is
used by the VMS to identify Vipersat units within a network and allows the VMS to manage
multiple networks, each with its own unique network ID number.
• Management Base Port – The Management Base Port sets the starting IP port addressing
for all VM, ACM, and CDRP messages.
• Use this setting ONLY if network port addressing is in contention.
Otherwise, leave this setting at default (hex) C000 (des) 49152 to avoid
unnecessary configuration changes.
• Changing this port number will affect internal management operations
across the entire network, requiring configuration changes to all modems.
• While this page is functional only when the optional VIPERSAT
MANAGEMENT SYSTEM (VMS) is installed and operational, the
Management Base Port number is essential to proper operations with or
without the VMS feature.