Comtech EF Data CDM-840 - Manual (Page 116)

CDM-840 Remote Router Revision 2
Ethernet-based Remote Product Management MN-CDM840
6–48
• LNB Reference Enable – Use the drop-down list to Enable or Disable the LNB Reference.
• LNB Current Threshold (Low and High) (0 to 500) – Enter a value, in mA, for either function.
Set the desired LNB configurations. Click [Submit LNB Controls] to save.
LNB Status
This read-only section provides the LNB Current (mA) and LNB Voltage (V) information.
Click [Refresh] to update this section with its latest available statistics.