Comtech EF Data CDM-840 - Manual (Page 37)

CDM-840 Remote Router Revision 2
Installation MN-CDM840
2–3
Feature Description
1 Custom Rack Enclosure
2 CDM-840 Remote Router
3 Standard Rack Shelving
4
Rack Enclosure Threaded Front
Mounting Rail (typical)
5 Unit Front Panel
6 User-supplied Screws
Figure 2-2. Installing the CDM-840 into a Rack Enclosure
Mount the CDM-840 in its assigned position in the rack enclosure. Use, as required:
• A standard rack-mounted shelf;
• User-supplied screws to secure the front panel to the rack enclosure threaded front
mounting rails;
• Comtech EF Data’s optional KT-0000168 (4”) or KT-0000195 (10”) Rear-Mounting
Support Brackets Kit ( Figure 2-3).