Comtech EF Data CDM-840 - Manual (Page 39)

CDM-840 Remote Router Revision 2
Installation MN-CDM840
2–5
Tools needed to install the KT-0000168 (4”) or KT-0000195 (10”) Bracket Kit (Figure 2-3):
• A medium Phillips screwdriver
• A 5/32-inch SAE Allen Wrench
• An adjustable Crescent wrench.
Follow these steps to install the Radyne-style chassis kit:
Step Description
1 Assemble the Adapter Plates to the back side of the CDM-840 chassis using the #10 Flat Head Screws.
2
Assemble the #10 S houlder S crews t hrough t he A dapter Plate m ounting s lots us ing t he #10 Flat
Washers, #10 Split Washers, and #10 Hex Nuts.
3
Mount the Rear Support Brackets to the rack enclosure threaded rear mounting rails using the #10
Rack Bracket Bolts.
4
Slide t he CDM-840 into t he f ront of t he r ack e nclosure. M ake s ure t hat t he # 10 S houlder Screws
properly engage into the slots of the Rear Support Brackets.