Comtech EF Data CDM-840 - Manual (Page 204)

CDM-840 Remote Router Revision 2
Appendix C MN-CDM840
C–12
C.8 Compatible Features and Detailed Specifications
Advanced VSAT BPM Mode is compatible with the following features:
Feature Comments
Group QoS (CTOG-250)
and QoS (CDM-840)
Header Compression Includes the following L2 Protocols:
• Ethernet 2.0 • Ethernet 2.0 + VLAN-tag
• Ethernet 2. 0 + V LAN-tag +
VLAN-tag
• Ethernet 2.0 + MPLS
• 802.3-raw • 802.3-raw + VLAN-tag
• 802.3-raw + VLAN-tag + VLAN-
tag
• 802.3 +802.2
• 802.3 +802.2 +VLAN-tag • 802.3 + 802.2 + VLAN-tag
+VLAN-tag
• 802.3 +802.2 + SNAP • 802.3 + 802.2 + S NAP +
VLAN-tag
• 802.3 +802.2 + SNAP + VLAN-
tag + VLAN-tag
• 802.3 + 802.2 + S NAP +
MPLS
Includes the following L3/L4 Protocols:
• IP, UDP, TCP, RTP
Payload Compression
PTP (Precision Timing Protocol)
RANOP with E1
dSCPC with VMS
Entry Channel Mode (ECM)
AES-128
Return Link ACM
ACM/VCM on the Outbound
Comtech Dynamic Routing
Protocol (for the management
network)
Multicast
IPv6 (traffic ports only)
VLAN trunking
VLAN Access Mode on the CDM-
840
CTOG-250 and CDD-880 device
redundancy with the VMS