Fluke Biomedical ProSim 6 - Manual (Page 20)

ProSim 6/8
Users Manual
8
To connect the Product to a PC:
Connect a USB port on your PC or laptop to the Mini B USB device port of the
Simulator.
Or
For the ProSim 8 only, plug in an XStick USB dongle to your PC USB port. See
Figure 5.
gjp070.eps
Figure 5. Laptop to PC Connection
Pre-Defined Simulations
The pre-defined simulations are set through the softkeys along the bottom of the home
screen. See Figure 4. There are seven factory pre-defined simulations: normal,
hypertensive, hypotensive, tachycardic, bradycardic, heart attack, and asystole. A More
softkey shows in the display for more simulations. Table 7 lists the parameter values for
each pre-defined simulation.