Fluke Biomedical ProSim 6 - Manual (Page 82)

ProSim 6/8
Users Manual
70
3. Push  or  to highlight the Time Format value.
4. Push  to set the format and go back to the Date/Time Settings screen.
How to Set the Backlight Intensity
The backlight on the Product has two intensity levels: Low and High. Each intensity can
be set separately. From the Setup screen, push  or  to highlight Display Settings
and push . To go back to the Setup screen, push the Back softkey.
To set the backlight intensity:
1. Push .
2. Push  or  to highlight a backlight value.
3. Push  or  to increase or decrease the backlight intensity.
4. Push  to set the backlight intensity and go back to the Display Settings
screen.
How to Set the Beeper
The Product beeper can be turned on and off and its volume set. From the Setup screen,
push  or  to highlight Sound Settings and push . To go back to the Setup
screen, push the Back softkey.
5. Push .
6. Push .
7. Push  or  to highlight On or Off.
When the beeper is set to on, two more variables appear in the Sound Settings screen.
To set the beeper type:
1. Push  or  to highlight the Beep Type value.
2. Push .
3. Push  or  to highlight the Beeper Type value.
The beeper can be set to beep at each key press or to beep only when an error occurs.
4. Push  to go back to the Sound Settings screen.
To set the beeper volume:
1. Push  or  to highlight the Volume value.
2. Push .
3. Push  or  to highlight the Volume value.
4. Push  to set the volume and go back to the Sound Settings screen.
How to Set the Pressure Units and IBP Sensitivity
The units of measure for pressure (IBP and NIBP) values and IBP sensitivity to simulate
are set through the pressure Settings. From the Setup screen, push  or  to highlight
IBP Settings in the setup list and push . To go back to the Setup screen, push the
Back softkey.
To set the IBP sensitivity:
1. Push  or  to highlight the IBP Sensitivity value.
2. Push .
3. Push  or  to highlight a sensitivity value.