Document Outline

• 190M Series Medical ScopeMeter Users Manual
  • Warranty
  • Table of Contents
• Safety
  • Introduction
  • Unpacking the Test Tool Kit
  • Safety Information: Read First
  • If Safety Features are Impaired
  • Safe Use of Li-ion Battery Pack
    • Storing the Battery Pack Safely
    • Using the Battery Pack Safely
    • Transporting the Battery Pack Safely
    • Disposing the Battery Pack Safely
• 1. Using the Scope and Meter
  • About this Chapter
  • Powering the Test Tool
  • Resetting the Test Tool
  • Navigating a Menu
  • Hiding Key Labels and Menus
  • Key Illumination
  • Input Connections
  • Making Input Connections
  • Adjusting the Probe Type Settings
  • Selecting an Input Channel
  • Displaying an Unknown Signal with Connect-and-View™
  • Making Automatic Scope Measurements
  • Freezing the Screen
  • Using Average, Persistence and Glitch Capture
    • Using Average for Smoothing Waveforms
    • Smart average
    • Using Persistence, Envelope and Dot-Join to Display Waveforms
    • Displaying Glitches
    • Suppressing High Frequency Noise
  • Acquiring Waveforms
    • Setting the Acquisition Speed and Waveform Memory Depth
    • Selecting AC-Coupling
    • Reversing the Polarity of the Displayed Waveform
    • Variable Input Sensitivity
    • Working with Noisy Waveforms
    • Using Mathematics Functions +, -, x, XY-mode
    • Using Mathematics Function Spectrum (FFT)
    • Comparing Waveforms
  • Pass - Fail Testing
  • Analyzing Waveforms
  • Making Automatic Meter Measurements (Model 190M-4)
    • Selecting a Meter Measurement
    • Making Relative Meter Measurements
  • Making Multimeter Measurements (Model 190M-2)
    • Making Meter Connections
    • Measuring Resistance Values
    • Making a Current Measurement
    • Selecting Auto/Manual Ranges
    • Making Relative Meter Measurements
• 2. Using The Recorder Functions
  • About this Chapter
  • Opening the Recorder Main Menu
  • Plotting Measurements Over Time (TrendPlot™)
    • Starting a TrendPlot Function
    • Displaying Recorded Data
    • Changing the Recorder Options
    • Turning Off the TrendPlot Display
  • Recording Scope Waveforms In Deep Memory (Scope Record)
    • Starting a Scope Record Function
    • Displaying Recorded Data
    • Using Scope Record in Single Sweep Mode
    • Using Triggering to Start or Stop Scope Record
  • Analyzing a TrendPlot or Scope Record
• 3. Using Replay, Zoom and Cursors
  • About this Chapter
  • Replaying the 100 Most Recent Scope Screens
    • Replaying Step-by-Step
    • Replaying Continuously
    • Turning Off the Replay Function
    • Capturing 100 Intermittents Automatically
  • Zooming in on a Waveform
    • Turning Off the Zoom Function
  • Making Cursor Measurements
    • Using Horizontal Cursors on a Waveform
    • Using Vertical Cursors on a Waveform
    • Using Cursors on a Mathematical Result (+ - x) Waveform
    • Using Cursors on Spectrum Measurements
    • Making Rise Time Measurements
• 4. Triggering on Waveforms
  • About this Chapter
  • Setting Trigger Level and Slope
  • Using Trigger Delay or Pre-trigger
  • Automatic Trigger Options
  • Triggering on Edges
    • Triggering on Noisy Waveforms
    • Making a Single Acquisition
    • N-Cycle Triggering
  • Triggering on External Waveforms (Model 190M-2)
  • Triggering on Video Signals
    • Triggering on Video Frames
    • Triggering on Video Lines
  • Triggering on Pulses
    • Detecting Narrow Pulses
    • Finding Missing Pulses
• 5. Using Memory and PC
  • About this Chapter
  • Using the USB Ports
  • Saving and Recalling
    • Saving Screens with Associated Setups
    • Saving Screens in .bmp Format (Print Screen)
    • Deleting Screens with Associated Setups
    • Recalling Screens with Associated Setups
    • Recalling a Setup Configuration
    • Viewing Stored Screens
    • Renaming Stored Screens and Setup Files
    • Copying-Moving Stored Screens and Setup Files
  • Using FlukeView® ScopeMeter Software
    • Connecting to a Computer
• 6. Tips
  • About this Chapter
  • Using the Standard Accessories
  • Using the Independently Floating Isolated Inputs
    • Measuring Using Independently Floating Isolated Inputs
  • Using the Tilt Stand
  • Kensington®-lock
  • Attaching the Hanging Strap
  • Resetting the Test Tool
  • Suppressing Key Labels and Menus
  • Changing the Information Language
  • Adjusting the Contrast and Brightness
  • Changing Date and Time
  • Saving Battery Life
    • Setting the Power Shutdown Timer
    • Setting the Display AUTO-off Timer
  • Changing the Auto Set Options
• 7. Maintaining the Test Tool
  • About this Chapter
  • Cleaning the Test Tool
  • Storing the Test Tool
  • Charging the Batteries
  • Replacing the Battery Pack
  • Calibrating the Voltage Probes
  • Displaying Version and Calibration Information
  • Displaying Battery Information
  • Parts and Accessories
    • Replacement Parts
  • Optional Accessories
  • Troubleshooting
    • The Test Tool Shuts Down After a Short Time
    • The Screen Remains Black
    • The Test Tool Cannot Be Turned Off
    • FlukeView Does Not Recognize the Test Tool
    • Battery Operated Fluke Accessories Do Not Function
• 8. Specifications
  • Introduction
  • Oscilloscope
    • Isolated Inputs A,B, C and D (Vertical)
    • Horizontal
    • Glitch Detection
    • Trigger and Delay
    • Automatic Connect-and-View Trigger
    • Edge Trigger
    • Isolated External Trigger (190M-2)
    • Video Trigger
    • Pulse-Width Trigger
    • Continuous Auto Set
    • Automatic Capturing Scope Screens
  • Automatic Scope Measurements
    • General
    • DC Voltage (VDC)
    • AC Voltage (VAC)
    • AC+DC Voltage (True RMS)
    • Amperes (AMP)
    • Peak
    • Frequency (Hz)
    • Duty Cycle (DUTY)
    • Pulse Width (PULSE)
    • Vpwm
    • V/Hz
    • Power (A and B, C and D)
    • Phase (A and B, C and D)
    • Temperature (TEMP)
    • Decibel (dB)
  • Meter Measurements for Model 190M-4
  • Meter Measurements for Model 190M-2
    • Meter Input (Banana Jacks)
    • Meter Functions
    • General
    • Ohms (()
    • Continuity (CONT)
    • Diode
    • Temperature (TEMP)
    • DC Voltage (VDC)
    • AC Voltage (VAC)
    • AC+DC Voltage (True RMS)
    • Amperes (AMP)
  • Recorder
    • TrendPlot (Meter or Scope)
    • Scope Record
  • Zoom, Replay and Cursors
    • Zoom
    • Replay
    • Cursor Measurements
  • Miscellaneous
    • Display
    • 
      Power
    • Probe Calibration
    • Internal Memory
    • External Memory
    • Mechanical
    • Interface Ports
  • Environmental
  • Certifications
  • Safety
  • 10:1 Probe VPS410
    • Accuracy
  • Electromagnetic Immunity
• Index
• Appendices
  • A. Installing USB Drivers
    • Introduction
    • Installing the USB Drivers
  • B. Battery Pack MSDS
    • Li-ion Battery Pack
    • C. Instrument Security Procedures
      • Memory
      • Security Summary