Hypertherm HD4070 Rev.1 - Manual (Page 135)

OPERATION
4-10 HyPerformance HD4070 Instruction Manual
BACK
YES NO
NEW CONSUMABLES?
BACK
10
11
Indicates last button selected.
MILD STEEL
200 AMPS
ELECTRODE
220307
NOZZLE
220343
SWIRL RING
220342
SHIELD
220345
NOZZLE
RETAINING CAP
220344
System setup screens – continued
3
Select cutting process to be used.
A custom setting must be saved before it will be
displayed.
The consumables required for the process are
shown for reference.
After pressing YES or NO, the display will advance
to screen 13.
If you press NO, the system will add arc starts, arc
hours and number of errors to the stored totals in the
system's counter/timer (shown on screen 16).
Press YES to zero the system counter/timer.