Install the remote display cable -20, Remote display -20, Signal cable – power supply to remote display -20 – Hypertherm HD4070 Rev.1 User Manual
Page 72: Ground wire -20, Install the remote display cable, Remote display, Signal cable – power supply to remote display, Ground wire, Female end
INSTALLATION
3-20
HyPerformance HD4070
Instruction Manual
A3
Install the remote display cable
Caution:
The HD4070 system can only support
one touch screen display, either local
or remote. Installing displays at both
locations on one system may cause
malfunctions or damage.
Installation note
1. Mark the identification number
on the end of the cable.
2. Instructions to install the remote display
are included with the applicable remote
display kit.
Remote display
Part no.
Length
123476
2 m (6 ft)
123481
3 m (10 ft)
123482
6 m (20 ft)
123018
7.5 m (25 ft)
123484
9 m (30 ft)
Part no.
Length
123485
12 m (40 ft)
123019
15 m (50 ft)
123487
23 m (75 ft)
123488
30.5 m (100 ft)
123489
46 m (150 ft)
RUN LIST – Power Supply to Remote Display Cable
1X4
Color
Display
5
Black
5
9
Red
9
8
N/C*
8
7
N/C
7
4
N/C
4
3
White
3
6
Black
6
2
Green
2
1
Black
1
* Not connected
1X4
Female end
A1
Signal cable – power supply to remote display
A2
Ground wire
4070.52
A1
Display
1X4
A 2
Ground to Chassis
A3
Female end
(sockets)