Hypertherm HD4070 Rev.1 - Manual (Page 51)

SPECIFICATIONS
2-12 HyPerformance HD4070 Instruction Manual
X-Y lifter assembly – 128606
Electrical
Motor .................................................................................+ 2.48 VDC, 2-phase (3.3 amp per ph.)
Limit switches....................................................................+ 24 VDC
Lifter control function
Motor .................................................................................Stepper
Motor drive ........................................................................Stepper, chopped constant current
Lifter feedback...................................................................Encoder
Lifter limit switches ............................................................Home switch and lower limit switch
Maximum Z axis speed .....................................................508 cm (200 inches) per minute
Maximum Z axis stroke .....................................................203 mm (8 inches)
Torch mounting dimensions
Without breakaway With breakaway
554 mm
21.8"
71 mm
2.8"
127 mm
5"
8.2 kg
18 lb
119 mm
4.67" 164 mm
5.78"
Note: The bracket should be as low on the torch sleeve as possible, without touching the quick disconnect, to
minimize vibration at the tip of the torch.