NavCom StarUtil Rev.E - Manual (Page 52)

STARUTIL User Guide Rev. E
MSG ID DISCRIPTION
1A Port Configuration Block
20 Data Request
30 Software Options
49 Solution Control
AE Identification Block
D0 LBM Identification Block
D1 LBM Authorization Status Block
D5 LBM Cancel History
Table 3: Save System Settings Text File Contents
Load Software Options
If you have purchased your receiver as a basic configuration, and would like to take advantage of
the multi-hertz measurement processing and output, or any of the other non-standard features, it is
not necessary to return the receiver to the factory for reconfiguration. The system can be
reconfigured without dismantling your existing hook-ups. Simply call or e-mail in to your NavCom
Technology, Inc. dealer, and purchase the necessary options. A file containing the reconfiguration
codes will be sent to you usually via e-mail. Save the file to your local hard drive in the folder you
have executed StarUtil from. To initiate an Options Upload go to the main StarUtil window and click
on TOOLS\LOAD SOFTWARE OPTIONS as seen in Figure 61.
‡
I is recommended that you archive your software options as you may be required to reload
them at some point. Please note that the options file is receiver dependant and cannot be uploaded
into multiple receivers.
t
After clicking on Load Software Options the window in Figure 64 will appear. Open your options file
using any text file viewer, i.e. NotePad, WordPad, etc. as shown in Figure 65.
Figure 64: Software Options Code Input
11 – 49