QuickLabel NiceWatch - Manual (Page 81)

Automating the Software
81
NiceWatch User Guide
shifting the start location of the first label. The rest of the unused labels on the page can
be printed with the help of this parameter.
The parameter identical label copies specifies how many copies of the same label should
be printed.
The parameter number of label sets specifies how many times the whole printing process
should be repeated.
If you do not need to set some of the supplementary parameters, use their default values.
Skip 0
Identical label copies 1
Number of label sets 1
PRINTER
PRINTER <printer_name>
Normally, the PRINT command prints the label to the printer specified in the label file.
Using this command you can override this defined printer and print the label to some
other printer.
If the printer name contains space characters, you have to enclose it in quotation marks.
For printer_name always use the system printer name as is displayed in the status line in
the label designer. System printer names are usually the same as the printer names in
Printers folder from Control Panel, but not always, so pay attention. They differ only
when you are using network-connected printers, when you should use
"\\SERVER\SHARE" syntax and not a printer friendly name.
PRINTJOBNAME
PRINTJOBNAME <job_name>
Specifies the print job name that will be used in print manager when using PRINT
command. After printing the name is returned in normal state. Use this option to easier
distinguish between different printing jobs in the Windows spooler.
If variable value contains space characters or commas, you have to enclose the text in
quotation marks (e.g. PRINTJOBNAME "Label for printing").
QUIT
This command stops the labeling program after printing. The application is closed.
RETURN
This command returns focus to the main labeling program after the printing completes.