Preface, Scope, Manual organization – Verilink WANsuite 5165 (34-00301.H) Product Manual User Manual
Page 11: Reface
P r e f a c e
xi
C
HAPTER
0
P
REFACE
This reference guide for the Verilink WANsuite 5165 intelligent integrated
access device (I
2
AD) describes unit features and specifications, configuration,
and cabling. It is not a users guide containing step-by-step procedures. This
manual is designed to be used as a reference regarding commands, interface
ports, configuration parameters, and other information specific to your 5165
unit.
Scope
The WANsuite 5165 has been designed to fit into an AS2000 rack/shelf.
Where appropriate, the text refers you to a specific AS2000 manual for
greater detail.
Manual Organization
The chapters and appendices in this manual are arranged for quick reference
when you need it. You do not have to read previous chapters to understand
the subsequent chapters. Appendices are designed to complement the main
chapters.
•
Chapter 1, "About the WANsuite 5165" – This chapter describes product
features and capabilities.
•
Chapter 2, "Installation" – This chapter describes unit port connections and
powering information.
•
Chapter 3, "Web Server Interface" – This chapter describes the menu screens
and configuration parameters accessed through the Web server interface.
•
−
This chapter describes the menu screens and
configuration parameters accessed through the VT100 interface.
•
Appendix A, "Specifications" – This appendix defines the specifications for
the WANsuite 5165. In addition, this section provides ordering information
and all the connector pin assignments for the interfaces on the back of the
WANsuite 5165 unit.
•
−
This appendix defines which Management
Information Base (MIB) files are supported by the WANsuite 5165 SNMP