Verilink WANsuite 5165 (34-00301.H) Product Manual - Manual (Page 187)

V T 1 0 0 I n t e r f a c e 4-63
Figure 4.53 Static Route Table Screen
The fields on this screen are described in the table below.
Route Details Screen
The Route Details screen (Figure 4.54) displays the details associated with a
specific route. Use this screen to establish the configuration parameters of a
given route.
Figure 4.54 Route Details Screen
Field Description
Endpoint Endpoint name (or interface) through which to send the IP packet
to reach the Target IP Address.
Target IP Address Represents the target network that you want this router to reach.
Target IP Mask Mask of the target network.
Next Hop IP address of the next device in the route.
Cost Cost of using that route.
Rte Stat Indicates whether or not a route is enabled or disabled.