Verilink WANsuite 5165 (34-00301.H) Product Manual - Manual (Page 129)

V T 1 0 0 I n t e r f a c e 4-5
NOTICE: Remember that passwords are case-sensitive and are limited to no more
than 10 characters. When logging on, password must be entered exactly
as it was programmed.
The System screen displays the user-selectable prompts listed below.
Maintenance Reset
Select this prompt to access a screen (Figure 4.4) where you can reset your
unit to factory defaults.
Figure 4.4 Maintenance Reset Screen
Using the space bar, you may toggle through the options to select the desired
maintenance reset (Default TDM Configuration, Default Packet Configuration,
Default Packet 2 Configuration, Default Packet 3 Configuration, or Default
Packet 4 Configuration). After you select an option, the unit will display a
confirmation screen (Figure 4.4) where you may choose either to proceed with
the maintenance reset or not.
Prompt Function
Maintenance Reset Brings up a screen where you can reset unit to its default
TDM or Packet, Packet 2, Packet 3, or Packet 4
configuration.
Save and Restart Saves the current configuration and restarts the unit.