Verilink WANsuite 5165 (34-00301.H) Product Manual - Manual (Page 25)

A b o u t t h e W A N s u i t e 5 1 6 5 1-11
CAUTION: In accordance with FCC Rules, Part 68.218(b), you must notify the
telephone company prior to disconnecting this product.
Power Connection
No external power supply is required for the WANsuite 5165; power is
received from its AS2000 rack connection.
When power is applied to the unit, the front panel LED indicators flash for
approximately 10 to15 seconds as the unit initializes. The green
POWER LED
will remain illuminated as long as the unit receives power. This LED turns
amber when the unit is in test mode.
Power Failure
If the POWER indicator does not illuminate, check the rack power connections
and the primary AC circuit breaker.
The WANsuite 5165 provides non -volatile memory retention of the unit
configuration in case of a power failure. This feature allows the unit to
automatically restore normal service and retain pre-existing time and date
information following a power loss.