Verilink WANsuite 5165 (34-00301.H) Product Manual - Manual (Page 111)

W e b S e r v e r I n t e r f a c e 3-81
Lease Time Tells the DHCP client the number of seconds it can retain this IP address. The
client should make a new DHCP request within the specified amount of time
to ensure the IP address is not given to another PC. Default is 600 seconds.
Primary DNS IP Addr If requested by DHCP client, the client then uses this address to resolve
names of IP addresses. Default is 0.0.0.0.
Secondary DNS IP
Addr
If requested by DHCP client, the client then uses this secondary address to
resolve names of IP addresses. Default is 0.0.0.0.
Domain Name Domain name to be used by all DHCP clients. Default is user’s server.
Router IP Addr IP address that all clients use for Gateway or Router. Default is 0.0.0.0.
Primary DNS IP Addr If requested by DHCP client, the client then uses this address to resolve
names of IP addresses. Default is 0.0.0.0.
Secondary DNS IP
Addr
If requested by DHCP client, the client then uses this secondary address to
resolve names of IP addresses. Default is 0.0.0.0.
The DHCP Server Details screen provides the following user-activated
buttons:
DHCP Host Table Screen
In some cases, it may be necessary to provide an IP station with a specific
DHCP server name, which may be used by the IP station when making a
DHCP request. That name is included on the DHCP Host Table screen
(Figure 3.79), which identifies the DHCP server sending DHCP packets. This
parameter is configured on the DHCP Host Details screen (Figure 3.80)
accessed by clicking on the appropriate numbered link under the “Index”
column.
Figure 3.79 DHCP Host Table Screen
Button Function
Submit Sets any values that have been changed.
Host Table Lists Host names (DHCP server identification).
Static Entry Table Creates a list of static IP addresses associated with MAC
addresses.
IP Address List Table Defines the addresses available for DHCP clients.
IP Address Status Table Displays DHCP Server statistics.