Verilink WANsuite 5165 (34-00301.H) Product Manual - Manual (Page 87)

W e b S e r v e r I n t e r f a c e 3-57
Figure 3.49 Trap Log Screen
Top Talkers Screen
Clicking on the “Top Talkers” link in the navigation tree displays a screen
(Figure 3.50), where you can set the parameters for and initiate the generation
of a list of IP addresses ranked in terms of the number of frames and octets
they have transmitted during a specified reporting period. This report lets MIS
managers determine, based on IP addresses, who is generating the most traffic
on a WAN.
Figure 3.50 Top Talkers Screen
To generate a Top Talkers report, enter the duration parameters and desired
report size in the appropriate fields and then click the “Submit” button.
Duration Establishes the amount of time (in seconds) for which the Top Talkers report
will capture IP traffic; typically this value is 900 seconds (15 minutes).
Time Remaining Establishes the amount of time (in seconds) for which the Top Talkers report
will capture IP traffic; typically this value is 900 (15 minutes). As soon as
you initiate generation of the report by pressing the “Submit” button, the
Time Remaining value is copied over to the Duration field.
Requested Report Size Establishes how many IP addresses will be reported as the “Top Talkers.”
NOTICE: While you may request any number, the unit is internally limited to a
maximum report size of 20.