Verilink WANsuite 5165 (34-00301.H) Product Manual - Manual (Page 118)

3-88 W A N s u i t e 5 1 6 5
Forward
Transmissions
Number of times this port has changed from any other state to a “Forwarding”
state.
Input Frame Number of frames received.
Output Frame Number of frames transmitted.
Input Discards Number of frames discarded.
Figure 3.89 Bridge Lookup Table
Address MAC Address learned and included in the forwarding table.
Port Port where the MAC Address was learned.
Status How the address was included in the forwarding table. The two possibilities
include “Self” (the unit’s own MAC address), and “Learned” (the unit-learned
MAC address is directly accessible by this port).
Simple Mail Transfer Protocol (SMTP)
Use the SMTP Details Screen (Figure 3.90) to configure the SMTP function
of the WANsuite 5165. SMTP is used to forward notification of events to a
user-definable list of up to five recipients. The even notification is sent as an
e-mail in the following format:
From: [email protected]
To: Event Receiver
Subject: Even Notification
IP Address: 192.168.60.157
System Up Time: 0 days, 01:20:02
System Name:
System Location:
System Contact:
Reporting the following event:
OOFS Threshold Exceeded, ifIndex 3, Count 5
The parameters associated with the SMTP Details screen are described below.