Verilink WANsuite 5165 (34-00301.H) Product Manual - Manual (Page 128)

4-4 W A N s u i t e 5 1 6 5
CAUTION: If you do not enter a keystroke for 10 minutes, the terminal interface
logs you off automatically.
System Screen
The first option on the Main menu screen is the System screen (Figure 4.3).
This screen lets you view and set specific information about the unit in
service.
Figure 4.3 VT100 System Screen
The System screen displays the fields shown below.
Field Description
Contact Read/write field that stores the name of a point-of-contact
for system failure.
Name Read/write field that holds the unit’s name.
Location Read/write field that holds the unit's location.
FrameStart ID Read/write field that holds the unit's ID that uniquely
identifies the unit and is used in the FrameStart
applications.
Blank Fields Read/write fields for user-specific labels and values.
Information resides in non-volatile memory.
Time Read/write field that holds the unit's internal time setting
in standard 24-hour HH:MM:SS format.
Date Read/write field that holds the unit's internal date setting
in standard MM/DD/YY format.
New Admin Password
New Read Only Password Lets you modify your Admin or Read-only password by
typing in a new password. Acceptable characters for use
in a password are digits 0–9 and letters A–Z and a–z, for a
total of 62 distinct characters.