Verilink WANsuite 5165 (34-00301.H) Product Manual - Manual (Page 21)

A b o u t t h e W A N s u i t e 5 1 6 5 1-7
• Management Interfaces:
• WANsight
−
an innovative, embedded Web-based user interface for
remote configuration and real-time reporting via Web browser (Verilink
recommends Microsoft Internet Explorer 5.0 or higher) that decreases
installation and configuration time for service employees, simplifies
troubleshooting and fault isolation of network problems, and optimizes
management of both TDM and frame-based services
• VT100 or TELNET
• Local Supervisory port
• Ethernet port for management or IP routing
• Frame Relay Aware:
• Support for leased-line and frame relay services
• Layer 2 end-to-end visibility and control
• Embedded frame relay test set
• Layer 3 support for visibility beyond the Network layer (up to 25
protocols)
• “Top Talker” reports
−
lets you find out who’s generating the most IP
traffic on your LAN
Front Panel
The front panel of the WANsuite 5165 application module (Figure 1.1)
provides the following:
•
Five LED status indicators
•
A local RJ-11 Supervisory port
•
An eight-position DIP switch
•
Ejector handles for installing the module in a shelf slot
Figure 1.1 Front Panel of WANsuite 5165