Grass Valley NVISION Compact CQX - Manual (Page 67)

Compact Router System Configurator • User’s Guide 55
9. Firmware Updates
Discussion
4 Browse to select a firmware file. (The file extension of a firmware file is .CRF.) and click
OK
.
The updates begins and a progress bar displays.
The firmware applies to all the devices you have selected. Firmware updates take between 2
and 3 minutes for each device.
Or
(Optional) Click
Stop Update ... at any time before the update completes. CRSC will not leave a
router or remote panel module in a undefined state. The update terminates at a safe point and
leaves the remaining devices as they were.
5 When the firmware update completes, it displays a status report.
Figure 9-3. Example of Firmware Status Report
6 Click
Save...
to save this report as a .txt file to print or review later.
How to View Past Update Reports
To display past update status reports, click
View Past Update Logs
. The button remains greyed out
(i.e., inactive) until you have performed an update that can be logged.
Note If CRSC fails to update any frame, try the update again. If the frame fails
repeatedly, cycle power, restart, and try the update again. If the frame fails
again, contact Miranda Technical Support.