HEIDENHAIN NC 124 - Manual (Page 42)

4 Positioning with MDI
42 TNC 124
NC
0
N o m i n a l p o s i t i o n v a l u e ?
6
NC
Enter the nominal position value for corner point 4 : X = + 60 mm,
tool radius compensation is already set to R +.
Entering and Moving to Positions
0
N o m i n a l p o s i t i o n v a l u e ?
Enter the nominal position value for corner point 3 : Y = + 50 mm
and
select tool radius compensation: R +.
5
Move the tool to the programmed position.
Move the tool to the programmed position.
Select the X axis.
Select the Y axis.