HEIDENHAIN NC 124 - Manual (Page 76)

6 Programming Workpiece Positions
76 TNC 124
Transferring Positions: Teach-In Mode
Changing nominal positions after they have been transferred
Positions which you have transferred into a program with Teach-In
can be changed. It is not necessary to leave the Teach-In mode to
do so.
Enter the new value in the input line.
Example: Changing a block transferred with Teach-In
Operating mode: PROGRAMMING AND EDITING, Teach-In
/
3 0
ENT
Functions for changing a Teach-In program
Function Soft key
Enter feed rate F
Enter miscellaneous function M
Enter spindle speed S
Delete current block
With the arrow keys (or GOTO), move to the block you wish to change.
Select the block.
Enter a new nominal position value
and
change the tool radius compensation (for example).
Confirm your changes.
N o m i n a l p o s i t i o n v a l u e ?