Yaskawa CM092 - Manual (Page 56)

Product Specification 4-3
‹ Connections
The maximum number of simultaneous connections is: 1 for I/O, 4 for Explicit, 2 for Drive Wizard™.
‹ Cable Loss and Timeout
Timeout is calculated based on RPI configuration parameter on startup. It is specified in seconds. A setting of "0" disables the timeout.
The default cable loss timeout is RPI* 4.
‹ ENTER and ACCEPT
The ENTER and ACCEPT commands are translated internally. ENTER and ACCEPT usage is determined by the identity of the drive.