Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 143)

4.3 CROSS REFERENCE
4-15
4
3. Result display area
The result of the cross reference is displayed.
„ Pop-up menu
1. Right-click in the result display area.
2. The pop-up menu is displayed.
1. Set cross reference condition (S)
The cross reference condition dialog box is displayed.
2. Output to file (F)
The file output dialog is displayed.
3. Jump (J)
Jump to the position in the ladder program that is specified at the cursor position in the
searched result.
4. Clear (L)
Clear the result of the cross reference.
5. Close (C)
Close the cross reference window.
Item Explanation
Address The register address is displayed.
Symbol The symbol is displayed.
Program Name The program name in which the searched object is used is displayed.
Rung Number The rung number of the searched object is displayed.
Step Number The step number of the searched object is displayed.
Instruction Name The instruction name in which the searched object is used is displayed.
Parameter Num-
ber The parameter number of instruction name in which the searched object
is used is displayed.
When the instruction is EXPRESSION, the line number that includes the
searched object in the operational expression is displayed with parenthe-
ses.
Attribute The read or write attribute is displayed.
Use Address The address is displayed when same memory searching check box is set
in the cross reference option.
1
2
3
4
5