Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 67)

2 PROGRAMMING
2.5.3 Edit Branch
2-32
2.5.3 Edit Branch
Changing the branch by shortcut key operation is explained. The junction or the joint of the
selected branch is changed to the other position.
1. Input the Ctrl + E from the keyboard. The branch edit mode icon on the toolbar becomes
active.
The branch edit mode mouse pointer is displayed.
2. Move the cursor to the changed point on the branch, and press the Enter key. It can be
changed to other point.
3. Move the cursor to the new point on the rung. The branch is displayed in the light color
while the cursor is moving.
4. Decide the new point by pressing the Enter key.
Normal edit mode is selected by the Ctrl + U.
INFO
INFO