Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 207)

8 LADDER CONVERSION TOOL
8-2
8.1 START LADDER CONVERSION TOOL
Start the ladder conversion tool from the file manager.
1. Move the cursor to the PLC folder shown with × mark that shows it was made in the
original ladder editor.
2. Select Tool (T) - Ladder Converter Tool (L).
3. The ladder conversion tool is displayed.
1. The ladder conversion tool is displayed by right-click menu or pop-up menu.
2. The menu for the ladder conversion tool is not displayed when the cursor is not on a PLC folder
that was made in the original ladder editor.
INFO