Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 83)

2 PROGRAMMING
2.7.1 Edit Single Instruction
2-48
„ Copy Instruction by Drag & Drop Operation
1. Click the instruction name of the instruction to be copied and drag it by holding down the
left mouse button. The movement cursor is displayed.
2. Release the mouse button while pushing the Ctrl key at a target position where the guide
mark is displayed. The copy mode cursor is displayed.
3. The dragged instruction is displayed there.
1. The other objects such as branch, branch block, rung, and rung comment can be similarly edited.
2. As for pasting the rung and the rung comment, it is possible only in the area outside the left power
rail.
INFO