Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 209)

8 LADDER CONVERSION TOOL
8-4
1. Source
The PLC folder where the ladder conversion tool is started is displayed as a source PLC
folder. It canít be changed.
2. Destination
Set the destination PLC folder where the converted program is stored. If there is no
specified PLC folder, it is automatically created.
3. Reference
Select the destination PLC folder from among the existing PLC folders. This is the
Browse function.
a) Click Reference button.
b) The Select dialog box is displayed.
c) Move to the cursor on the specified PLC folder.
d) Click OK button.
e) The selected PLC folder is input as the destination PLC folder.
4. Program
Only the program is converted.
5. Detail
Click Detail button, and the detail window is displayed.
The individual program can be selected in the detail window. It is described later.
It is available when program check box is set.
6. Select All
All programs in the PLC folder are converted.
It is available when program check box is set.
7. Others
The definition files and other data files except programs are converted.