Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 81)

2 PROGRAMMING
2.7.1 Edit Single Instruction
2-46
2. The selected instruction is cut out and its information is saved in the clipboard.
„ Copy Instruction
1. Select the cut out instruction and select Edit (E) - Copy (C) of the menu or from the pop-
up menu by the right-click.
<Key Operation>: Ctrl + C
2. The selected instruction is copied and its information is saved in the clipboard.
„ Paste Instruction
1. Select the pasted position as the guide mark and select Edit (E) - Paste (P) of the menu
or from the pop-up menu by the right-click.
<Key Operation>: Ctrl + V
INFO
INFO