Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 93)

2 PROGRAMMING
2.8.1 Save
2-58
2.8 SAVE PROGRAM
There are two methods of saving the program, Save and Save All.
The program is saved in both the hard disk on PC and the controller in on-line mode, but it is saved in
only the hard disk on PC in the off-line mode.
2.8.1 Save
An active program file is overwrote and saved.
1. Select File (F) - Save (S) of the menu.
<Key Operation>: Ctrl + S
2. An active program file is overwrote and saved.
IMPORTANT
INFO