Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 85)

2 PROGRAMMING
2.7.2 Edit Operand of Instruction
2-50
„ Cut/Paste Symbol or Address
1. Select the cut out symbol or address of instruction and select Edit (E) - Cut (T) of the
menu or from the pop-up menu.
<Key Operation>: Ctrl + X
2. Select the pasted position as the guide mark and select Edit (E) - Paste (P) of the menu
or from the pop-up menu by the right-click.
<Key Operation>: Ctrl + V
3. The result of Cut/Paste operation is displayed.
INFO
INFO